Aerotech ADRS Series, Hardware Manual

Page: 26 / 44

Electrical Specifications and Installation ADRS Hardware Manual
Table 3-3: 25-Pin Feedback Connector Pinout
Pin Description Connector
1 Signal shield connection
13
25
1
14
2 Over-Temperature Thermistor sensor
3 +5 V power supply (internally connected to Pin 16)
4 Reserved
5 Hall Effect sensor, phase B
6 Marker-N
7 Marker
8 Reserved
9 Reserved
10 Hall Effect sensor, phase A
11 Hall Effect sensor, phase C
12 Reserved
13 Reserved
14 Cosine
15 Cosine-N
16 +5 V power supply (internally connected to Pin 3)
17 Sine
18 Sine-N
19 Reserved
20 Common ground (internally connected to Pin 21)
21 Common ground (internally connected to Pin 20)
22 Reserved
23 Fault output from encoder
24 Reserved
25 Reserved
Case Signal shield connection (to case)
Table 3-4: Feedback Connector Mating Connector
Mating Connector
Aerotech P/N Third Party P/N
Backshell ECK00656 Amphenol #17E-1726-2
Connector ECK00300 FCI DB25S064TLF
26 Chapter 3 www.aerotech.com