Installation and Configuration
Npaq® Hardware Manual
2.7.2. PSO Differential Outputs (J7)
The PSO Output is also available in differential and open collector format (as shown in
and
). The differential format is recommended for maximum noise immunity. Differential and open-
collector outputs are active low polarity only. JP16 does not change the active polarity of these signals.
Figure 2-28:
PSO Output 1 and 2 Differential Outputs
Figure 2-29:
PSO Opto-Isolated Output and PSO Open Collector Outputs
www.aerotech.com
Chapter 2
61
