DA20-100 ‘Katana’ 4X Manual
1.6.1 MAINTENANCE - EQUIPMENT: AVIONICS
Neither the software nor the documentation may
be used for real aviation and training purposes.
01<21
page
It is possible to replace the GPS500 unit with the GNS530 from RealityXP.
That can be done directly in FSX without the need of editing cfg files or
using an external installer. Of course, the GNS530 has to be installed
properly before.
GPS500
(Installed)
GNS530
Default FSX GPS
with some extra
features
The GNS530 from
Reality XP must
be installed
The installed unit is indicated by a hook and the
word
Installed
next to the unit's name. By
clicking the empty square of the desired device,
the replacing icon will apear and the status bar
should indicate the progress. As soon as the
process has been finished the unit is available in
the virtual cockpit.
1.6.2 MAINTENANCE - EQUIPMENT: WHEEL FAIRINGS
Wheel Fairings
are reducing drag of the landing gear and make the aircraft
faster. But they are not suitable for all terrain. The fairings can be mounted
or unmounted just by clicking on the corresponding position. Wait for the
progress to be completed before starting another installation procedure.
INTRODUCTION AND DESCRIPTION
NO GPS
An INOP unit will be
installed.
NOTE:
!
Problems can occur on some systems if
other radios from Reality XP are
installed. In this case change this line
gauge47=rxpGNS!GNS530..
into
//gauge47=rxpGNS!GNS530..
in the panel.cfg which can be found
here: [FSX]\SimObjects\Airplanes\
Diamond DA20-100 ‘Katana’ \ panel
Summary of Contents for DA20-100
Page 1: ...MANUAL DA20 100 Katana ...
Page 2: ......
