27
pushing slightly the control bar. Before your feet touch the ground, slow glider until
signs of stall become apparent quickly ease the bar out all the way. If you made this
procedure correct, air resistance will decrease the speed of glider and you will land
safely.
The “ Target” lands very easily.
We wish you soft landings !
Section 4. B R E A K D O W N
Breakdown of the “ Target” is simply the reverse of the set up procedure. While
performing the breakdown leave the quick-mountable fasteners on one of the
components of the frame.
4.1. BREAKDOWN INTO THE PACKAGE 6 METRES LONG
4.1.1. Detach the nose cone.
4.1.2. Remove the washout tips and attach them by velcro (Fig.42).
Fig.42
4.1.3. Rest the glider on the control bar and the tail. Undo the lock of the bottom front
wires.
4.1.4. Tension slightly the crossbar sweep wires by your hand and remove the ring of
these wires from the hook on the keel tube.
Summary of Contents for TARGET 13
