Aeros TARGET 13, Manual

Page: 23 / 52

22
2.4.4. Look into the sail at each wing tip. Check that the tip battens are properly seated
and fixed with the leech lines.
Be sure that the sail mount webbing is safely and correctly secured in the end cap slot
(Fig.35).
To provide an equal tension to the left and right part of the sail, the mountable sections
of the consoles (N4) must be installed symmetrically.
Fig.35
2.4.5. Check the trailing edge for any cuts, tears or broken stitching. Check that the top
surface battens are fixed with the batten tension leech lines.
2.4.6. Check that each of the luff lines is free from the batten tension leech lines and
the luff line safety ring is flush with the bottom of the sail (Fig.36).
Check that no luff line wire is looped underneath a more inboard batten.
Fig.36