9
To open or close the batten tip lever - press firmly on the undersurface of the tip lever to disengage or
engage it (fig. 7).
Figure 7
8. Spread the wings all the way and check all cables for any twisted thimbles or tangled cables. At the
rear inside of the keel pocket find the sweep (crossbar tensioning) wire. Pull the sweep wire out the rear
end of the keel pocket, and check that the sweep wire is not wrapped around the keel. Attach the ring of
the sweep wire to the hook, which is placed on the keel tube (fig. 8).
Figure 8
9. Pull the top rear wire backwards, the king post will stand all the way up. Attach the ring of the rear wire
to the same hook on the keel tube on top of the sweep wire ring (fig. 9 and fig. 10).
Figure 9
Figure 10
