19
of the sail goes into the wider part of the glider bag and zip the glider bag up (fig. 32 and fig. 33).
Figure 32 Figure 33
12. Remove battens from the batten bag. Disconnect battens #1 and #2 as shown on the fig. 34, or
simply unscrew the rear part of the batten on the newer models and put all battens back in to the batten
bag.
Figure 34 Figure 35
13. Detach the rear part of the keel tube. Disconnect leading edge tubes and crossbar tubes (fig. 35).
14. Fold lower control frame fittings as shown on fig. 36. Roll up all wires as shown on fig. 36 and fig. 37.
Put protection bags on the control frame, the king post and the keel tube.
Figure 36
Figure 37
15. Rotate the control frame around its apex forward so, that the control frame lower fittings are directed
towards nose plates of the frame (fig. 38).