10
10. Install the last three cambered outboard top surface battens. Install the tip lever battens as shown on
the figures below (fig. 11 and fig. 12).
Figure 11
Figure 12
11. The next step is to install the outboard sprogs. To do so swing the sprog away from the leading edge
and push it towards the leading edge in to the receptacle. Make sure the sprog sits all the way in the
sprog receptacle (fig. 13).
Figure 13
12. Attach the bottom front wires to the hook on the bottom nose plate (fig. 14).
13. Install the nosecone, which is connected to the front part of the keel tube (fig. 15).
Figure 14
Figure 15
WARNING
DO NOT FLY WITHOUT THE NOSECONE!
