Check that the washout tip is properly secured in position supporting the batten, and that the washout tip access
zipper is properly closed.
Check that the bridles are properly engaged.
Check the trailing edge for any cuts, tears or broken stitching.
4.3.5. From the rear keel
Check that the sweep wires are tight and secured on the hook on the keel tube.
Check the kingpost top for proper attachment of the bridles and condition of the top rear wire and bridle wires.
Check the keel mount webbing, and bottom rear wires are safely secured to the keel tube.
4.3.6.Along the trailing edge, right wing
Same as for the left wing.
4.3.7.At the right tip
Same as for the left tip.
