-
-
-
-
Contents
1. Ozone Controller Components
1
2. Setting Up the Ozone Controller
2
2.1 Monitor Assembly
2
2.2 Power Requirements
2
2.3 External Control Wiring
3
2.4 Removing and Replacing the Sensor Head
3
3. Modes of Operation
4
3.1 Warm up
4
3.2 Operating in Low or High Ozone Environments
4
3.3 Operating as a Controller
4
3.4 Dual Alarm mode
6
3.5 Summary of LED Indicators
7
3.6 Inlet Port Maintenance
7
3.7 Dip Switch Settings
8
4. Specifications – Series 130
9
5. Dimensions
10
6. Troubleshooting
11
7. Appendix
12
7.1 Copyright
12
7.2 Statement of Compliance
13
7.3 Warranty
14
7.4 Guidelines on How to Measure Ozone
16
Version 1.1 20.02.10
1.0 Ozone Controller Components
Series 130 Ozone Controller
The following components are supplied with the Series 130 Ozone
Controller:
•
Series 130 controller assembly inside an FRP enclosure
•
Ozone sensor head plugged in
•
User guide
•
Wall fixing brackets
•
Eight pole M12 male cable connector
Please check that all these components have been supplied
and contact your dealer or Aeroqual on email at:
[email protected] if any of the components are missing.
1
Series 130
Ozone Controller
User Guide
Distributor: Wessex Power Technology Ltd, Dorset
Tel: +44 (0)845 520 0303 | Fax: +44 (0)845 520 0304
Email: [email protected] | www.wessexpower.co.uk
