background image

- -

-

-

7.3 Warranty

Thank you for purchasing this Aeroqual product. To get maximum use of
the features of your new product we recommend that you follow a few
simple steps:

Read the guidelines for safe and efficient use.

Read all the terms and conditions of your Aeroqual Warranty.

Save your original receipt. You will need it for warranty repair
claims. Should your Aeroqual product need warranty service,
you should return it to the dealer from whom it was purchased
or contact Aeroqual.

Our Warranty

Aeroqual warrants this product to be free from defects in material and
workmanship at the time of its original purchase by a consumer, and for
a subsequent period as stated in the following table

:

Products

Warranty Period

Series 130 Controller

One year from the date of purchase

High Ozone Concentration Head

Six months from the date of purchase

Low Ozone Concentration Head

Six months from the date of purchase

All accessories for the product are covered by a warranty for a period as
follows

:

Accessories

Warranty Period

Other Accessories

One year from the date of purchase

This warranty is expressly limited to the original owner who purchases
the equipment directly from Aeroqual or from an authorized Aeroqual
dealer.

What we will do

If, during the warranty period, this product fails to operate under normal
use and service, due to improper materials or workmanship, Aeroqual
subsidiaries, authorized distributors or authorized service partners will, at
their option, either repair or replace the product in accordance with the
terms and conditions stipulated herein.

Conditions

1.

The warranty is valid only if the original receipt issued to the original purchaser by
the dealer, specifying the date of purchase, is presented with the product to be
repaired or replaced. Aeroqual reserves the right to refuse warranty service if this
information has been removed or changed after the original purchase of the
product from the dealer.

2.

If Aeroqual repairs or replaces the product, the repaired or replaced product shall
be warranted for the remaining time of the original warranty period or for ninety
(90) days from the date of repair, whichever is longer. Repair or replacement may
be via functionally equivalent reconditioned units. Replaced faulty parts or
components will become the property of Aeroqual.

3.

This warranty does not cover any failure of the product due to normal wear and
tear, damage, misuse, including but not limited to use in any other than the normal
and customary manner, in accordance with Aeroqual’s user guide for use, faulty
installation, calibration and maintenance of the product, accident, modification or
adjustment, events beyond human control, improper ventilation and damage
resulting from liquid or corrosion.

4.

This warranty does not cover product failures due to repairs, modifications or
improper service performed by a non-Aeroqual authorized service workshop or
opening of the product by non-Aeroqual authorized persons.

5.

The warranty does not cover product failures which have been caused by use of
non-Aeroqual original accessories.

6.

Tampering with any part of the product will void the warranty.

7.

Damage to the sensors can occur through exposure to certain sensor poisons
such as silicones, tetraethyl lead, paints and adhesives. Use of Aeroqual sensors
in these environments containing these materials may (at the discretion of
Aeroqual) void the warranty on the sensor head. Exposure to levels of ozone
outside of the design range of a specific Aeroqual sensor head can adversely
affect the calibration of that sensor head and will also void this warranty as it
applies to the replacement of sensor heads.

8.

Aeroqual makes no other express warranties, whether written or oral, other than
contained within this printed limited warranty. To the fullest extent allowable by law
all warranties implied by law, including without limitation the implied warranties of
merchantability and fitness for a particular purpose, are expressly excluded, and in
no event shall Aeroqual be liable for incidental or consequential damages of any
nature whatsoever, however they arise, from the purchase or use of the product,
and including but not limited to lost profits or business loss.

Some countries restrict or do not allow the exclusion or limitation of incidental or
consequential damage, or limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights, which may vary from
country to country.

14

15

Summary of Contents for 130 Series










Reviews: