7
Framing Nailer ACHF9034 www.aeroprotools.com
(Set the switching device to the upward position completely as shown in the diagram. Otherwise, it will be set to
CONTACT ACTUATION MECHANISM.)
②
Position the nail outlet on the workpiece with finger of the trigger.
③
Depress the push lever firmly until it is completely depressed.
④
Pull the trigger to drive a nail.
⑤
Remove finger from the trigger
To continue nailing in a separate location, move the nailer along the wood, repeating steps
②
-
⑤
as required.
WARNING!
Potential hazard that could result in serious injury or loss of life.
A nail will fire each time the trigger is depressed as long as the push lever remains depressed.
(2)Continuous operation(Push lever fire) Using CONTACT ACTUATION MECHANISM
WARNING!
Potential hazard that could result in serious injury or loss of life.
To avoid double firing or accidental firing due to recoil.
1) Do not press the nailer against the wood with excessive force.
2) Separate the nailer from the wood as it recoils after nailing.
①
Set the switching device to the downward position (to set to CONTACT ACTUATION MECHANISM). (Set the switching
device to the downward position completely as shown in the diagram. Otherwise, it will not operate properly.)
②
Pull the trigger with the Nailer off the workpiece.
③
Depress the push lever against the workpiece to drive a nail.
④
Move the Nailer along the workpiece with a bouncing motion. Each depression of the push lever will drive a nail. As
soon as the desired number of nails have been driven, remove finger from the trigger.
WARNING!
Potential hazard that could result in serious injury or loss of life.
Keep your finger of the rigger except during fastening operation, because serious injury could result if the push lever
accidentally contacts you or others in work area.
Keep hands and body away from the discharge area. This nailer may bounce from the recoil of driving a fastener
