Attach the Male Quick Release Clip to the
Retract Shoulder Bracket using M3x8mm
and M3x6mm Button Head Cap Screws,
6mm North-South and 8mm East-West,
and 3mm Aluminium low profile Nuts.
Attach the Twin Skid Foot Clip using M3x12mm
Socket Head Cap Screws and Outer Housing Spacer.
X10
X5
X4
X4
X4
X10
X2
Begin by fixing your M3 Outer Housing Spacers
to your Landing Gear Plates using M3x8mm
Socket Head Cap Screws and 1mm Washers.
Note: only put the Outer Housing Spacers in
that are shown in the picture below.
X2
28
Summary of Contents for SkyJiB X4 XL
