Aeronaut Airmarine Special, Manual, Page: 19 / 20

Parts List
110
111
Carefully sand the complete model (grade 240 sandpaper) and apply 2 to 3 coats of wood filler. Before you apply each coat,
carefully sand the model. Apply clear varnisch to the bottom parts of the hull or the colour of your choice, and apply several
coats of clear varnish to all mahogany parts.
After the varnish has dried completely, glue or screw the fin/airtrap 110 + 111 to the inside of the sponsons. Seal screws with
clear varnish.
38
No. Description Pieces Material Plate Type Dimensions
0 jig 2 Depron 0 laser cut 3 mm
1-10 formers 10 birch ply 1+2 laser cut 3 mm
11 keel 2 spruce 3 laser cut 4 mm
12 stringer spruce 3 laser cut 4 mm
13 reinforcement 1 birch ply 4 laser cut 2 mm
14 stringer 2 birch ply 4 laser cut 2 mm
15 stringer 2 birch ply 4 laser cut 2 mm
16 stringer 2 spruce 3 laser cut 4 mm
17 stringer 2 spruce 3 laser cut 4 mm
18 bottom/hull 1 birch ply 5 laser cut 1 mm
19 sponson 2 birch ply 6 laser cut 1 mm
20 sponson 2 birch ply 6 laser cut 1 mm
20.1 reinforcement 4 spruce 3 laser cut 4 mm
21 sponson 2 birch ply 6 laser cut 1 mm
22 bottom/hull 2 birch ply 6 laser cut 1 mm
23 side panel 2 birch ply 7 laser cut 1 mm
24 stringer 2 spruce 3 laser cut 4 mm
25 frame 1 mahogany ply 8 laser cut 1.5 mm
26 reiniforcement/frame 1 mahogany ply 10 laser cut 1.5 mm
27 magnet lock 1 steel
28 side panel 2 mahogany ply 9+10 laser cut 1.5 mm
29 left deck panel 1 mahogany ply 9 laser cut 1.5 mm
30 right deck panel 1 mahogany ply 10 laser cut 1.5 mm
31 panel/sponson 2 mahogany ply 9 laser cut 1.5 mm
32 panel/hull side 2 mahogany ply 9 laser cut 1.5 mm
33 panel/transom 2 mahogany ply 9+10 laser cut 1.5 mm
34 panel/motor mount 1 mahogany ply 8 laser cut 1.5 mm
35 panel/motor well 2 mahogany ply 10 laser cut 1.5 mm
36 spacer 2 birch ply 7 laser cut 1 mm
37 side panel/cockpit 2 mahogany ply 8 laser cut 1.5 mm
38 cockpit floor 1 birch ply 12 laser cut 3 mm
39 rear panel/cockpit 1 birch ply 12 laser cut 3 mm
No. Description Pieces Material Plate Type Dimensions
40 front panel/cockpit 1 birch ply 12 laser cut 3 mm
41 instrument panel 1 mahogany ply 8 laser cut 1.5 mm
42 cover 1 mahogany ply 8 laser cut 1.5 mm
43-48 hood nose block 6 obechi 11 laser cut 2 mm
49 hood frame 1 mahogany ply 8 laser cut 1.5 mm
50 hood former 2 mahogany ply 8 laser cut 1.5 mm
50.1 corner piece 6 mahogany ply 8 laser cut 1.5 mm
51 hood former 1 mahogany ply 8 laser cut 1.5 mm
52 hood former 1 mahogany ply 8 laser cut 1.5 mm
53 fin frame 1 birch ply 2 laser cut 3 mm
54-56 fin internal structure 3 birch ply 2 laser cut 3 mm
57-59 fin top structure 3 birch ply 7 laser cut 1 mm
60-61 fin rear end 2 birch ply 7 laser cut 1 mm
62-68 fin doublers 12 obechi 11 laser cut 2 mm
69 floor 1 mahogany ply 8 laser cut 1.5 mm
70 motor mount panel 1 mahogany ply 8 laser cut 1.5 mm
71 left + right panels 2 mahogany ply 9 laser cut 1.5 mm
72 rear motor mount panel 1 mahogany ply 9 laser cut 1.5 mm
73 servo tray 2 birch ply 1 laser cut 3 mm
74 servo tray monting beam 2 birch ply 2 laser cut 3 mm
75 boatstand 1 birch ply 2 laser cut 3 mm
76 boatstand 1 birch ply 2 laser cut 3 mm
77 boatstand 2 birch ply 1 laser cut 3 mm
78 steering wheel 1 nickel silver photo etched 0.5 mm
79 steering wheel cover 2 mahogany ply 9+10 laser cut 1.5 mm
80 ateering wheel cover 1 nickel silver photo etched 0.5 mm
81 steering wheel locating discs 2 mahogany laser cut 0.5 mm
82 steering shaft 1 stainless steel cut part 3 x 50 mm
83 steering column 1 brass cut part 4/3.1 x 40 mm
84 steering shaft flange 1 nickel silver photo etched 0.5 mm
85 throttle lever bracket 2 mahogany ply 8 laser cut 1.5 mm
86 throttle lever housing 2 nickel silver photo etched 0.5 mm
87 throttle lever 1 nickel silver photo etched 0.5 mm
88 screw 4 brass hardware M2x6
89 stop nut 8 metal hardware M2
89.1 washer 2 metal photo etched 0.5 mm
90 screw 4 brass hardware M2x12
91 motor mounting screw 2 brass hardware M3x15
92 stop nut 2 metal hardware M3
93 steering linkage 2 stainless steel cut part 0.8 x 120 mm
94 cockpit fairing 1 mahogany ply 10 laser cut 1.5 mm
95 shaft 2 stainless steel cut part 1.2 x 7 mm
96 pulley 2 brass hardware 8 mm
97 pulley cover 2 nickel silver photo etched 0.5 mm
98 bracket 2 metal hardware
99 push/pull wire 1 stainless steel cut part 0.55 x 1,700 mm
100 sleeve 2 brass hardware 1,8/1,4 mm
101 handle base plate 1 nickel silver photo etched 0.5 mm
102 handle mid section 1 nickel silver photo etched 0.5 mm
103 handle left/right 2 nickel silver photo etched 0.5 mm
104 magnet 1 hardware
105 steering frame 1 nickel silver photo etched 0.5 mm
106 block 2 metal hardware
107 connector 2 metal hardware
108 covering material 1 Oratex cut part
109 turnbuckle 2 brass hardware
110 fin/airtrap 1 stainless steel hardware 0.8 mm
111 fin/airtrap 1 stainless steel hardware 0.8 mm