1. Power on the AP
and allow it to find and connect to HiveManager Classic. Once the
AP
is
connected, it appears in the table of unconfigured devices on the
Monitor > Devices
page and is categorized as New under the Management Status table header.
2. Select the check box for the AP, and then choose
Update > Advanced >
Update Country
.
3. On the
Update Country Code
page, choose the appropriate country code from the drop-
down list, and then click
Upload
.
For Devices Running HiveManager NG
1. Power on the AP and allow it to find and connect to HiveManager NG. Once the AP
is
connected it appears in the table of devices on the
Monitor > Devices
page.
2. Select the check box next to the AP, and then choose
Assign Country Code
from the
Actions
drop-down list. In the dialog box that appears, select the appropriate country from the drop-
down list, and then click
Save
.
3. Upload your changes to the device.
Safety Guidelines
The information in this section applies to AP150W devices.
The following safety icons are used in these guidelines to identify the type of precaution:
This icon indicates a general caution. Failure to comply with a caution
notification can result in damage to equipment.
This icon indicates an electrical caution. Failure to comply with an electrical
notification can result in serious injury or death, and extensive damage to
equipment.
The following table lists the safety precautions you should follow when installing your
AP150W devices.
Aerohive devices must be installed by a professional installer who is certified to
install these types of devices and to ensure that they are properly grounded
and meet applicable local and national electrical codes.
These devices are intended for indoor use only.
Do not install the device in an environment where the operating ambient
temperature might exceed the recommended ranges.
Electrical equipment generates heat. Ambient air temperature may not be
adequate to cool equipment to acceptable operating temperatures without
adequate circulation. Be sure that the room where you install your device has
adequate air circulation.
Changes or modifications made to this device that are not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
Page 2 of 17
AP150W Hardware User Guide
8/21/2017
Preliminarty
Draft
