25
Tending Your Garden
As your plants begin to grow, leave approximately 1-2 inches
of space between the top of plants and the lights.
To raise the lights:
Unplug the AeroGarden (the
backup system will save your
settings).
Carefully remove the
Bowl
from
the
Base
and set aside.
Turn the AeroGarden around
so the back of the
Lamp Arm
is
facing you.
Firmly hold the lower section of
the
Lamp Arm
and push in the
Locking Button
on the
Arm
. With
your other hand, grasp the silver
ring at the top of the
Arm
(where
the
Lamp Hood
attaches to the
Arm
). Pull up firmly on
Lamp
Hood
until the
Locking Button
becomes visible in the next hole.
Move
Locking Button
up only one hole at a time. The lights need to
be as close to the plants as possible for optimal light intensity.
Replace the
Bowl
on the
Base
and plug in your AeroGarden.
Lift the
View Doo
r to check that
the water is flowing. If not, refer
to Troubleshooting on page 52
of this Guide.
Raising Lights
Lamp
Hood
Locking
Button
Lamp
Arm
Base
Bowl
1
3
2
4
If the
Grow Bulbs
are too
close to the plants, the
leaves may brown and burn.
If they are too far away, your
plants will “stretch” towards
the light and look floppy
and unhealthy.
!
5
6
