Aeroflex Operation Manual
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG 3-2
3.3 REAR PANEL DESCRIPTION
Figure 3-2 shows the NAV 2000R rear panel. Shown on the Figure are the modules, external modulation
input, audio output, power connection, and GPIB bus connector.
FIGURE 3-2: REAR PANEL
3.4 POWER UP PROCEDURE
Before turning on the power to the NAV 2000R, ensure that the proper mains power is applied. Configure
the unit for the input voltage to be used.
To turn on the NAV 2000R, press the power button located at the bottom left corner of the front panel.
Upon power up, the NAV 2000R will perform a self-test and when complete will indicate self-test results
on the display.
3.5 LOCAL USER INTERFACE
Local operation of the NAV 2000R consists of using the display and keypads for entry. Four groups of
keypads allow control of mode, display cursor, quick entry, and numeric entry. The display is menu
driven with selectable data fields on each menu page.
Parametric data is entered using front panel keypads and display. Selectable options are surrounded by
"bubbles". Each bubble represents a field that the user may select and change. Located underneath
each selectable field is a field identifier. Navigating the menus is discussed below.
Summary of Contents for NAV 2000R
Page 4: ......