Aeroflex Operation Manual
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG 3-1
SECTION III
OPERATION
3.1 GENERAL INFORMATION
This Section describes how to operate the NAV 2000R VOR/ILS/COM generator. It contains information
for an initial inspection, general operating information, and local and remote operation. The NAV 2000R
can be operated using either the local user interface or the remote user interface. The local user
interface uses the front panel keypads and display. The remote interface uses a General Purpose
Interface Bus (GPIB). Throughout this manual, GPIB shall be used to mean an interface bus conforming
to IEEE Standard 488-1978, "Standard Digital Interface For Programmable Instrumentation."
3.2 FRONT PANEL DESCRIPTION
Figure 3-1 shows the NAV 2000R front panel. Shown on the Figure are the display (including its fields),
the mode select keypad, cursor keypad and select key, hot keys keypad, numeric keypad, power switch,
and RF output connector.
FIGURE 3-1: FRONT PANEL
Summary of Contents for NAV 2000R
Page 4: ......