www.aerocomm.com
S
PECIFICATIONS
2
T a b l e 1 : C o n n e x N e t S p e c i f i c a t i o n s
General
Interface Connector
RJ-45 Female Ethernet
RF Connector
RPSMA (Reverse polarity SMA) jack
Serial Interface Data Rate
Up to 115.2 kbps
Impedance
50 ohms unbalanced
Channels
32 (USA/Canada), 7 (Australia)
Security
One byte System ID. 56-bit DES encryption key.
Interface Buffer Size
Input/Output: 256 bytes
Transceiver
Frequency Band
902 - 928 MHz (USA/Canada); 915 - 928 MHz (Australia)
RF Data Rate (Raw)
76.8 kbps
RF Technology
Frequency Hopping Spread Spectrum (FHSS)
Output Power EIRP (3dBi gain antenna)
1000 mW
Supply Voltage
7 - 25 VDC
Current Draw (mA)
TBD
Sensitivity
-99dBm
Range, Line of Site (based on 3dBi gain antenna)
Up to 20 miles
Networking
Supported Network Protocols
ARP, DHCP client, ICMP, IP, UDP, TCP, Telnet, TFTP, HTTP server, SMTP client, POP3 cli-
ent, FTP client, SNTP client, SNMP, and PPP
Physical Layer
10/100BaseT
Environmental
Temperature (Operating)
-40
°
C to 85
°
C
Physical
Dimensions
4.4” x 2.7” x 1.4”
Certifications
FCC Part 15.247
KQLAC4490
Industry Canada (IC)
2268C-AC44901000
