2 5
D E V I C E S E T U P
www.aerocomm.com
11
At the prompt, type the following command: #set ip eth0 dhcp-client disable
12
Wait for an OK response.
13
At the prompt, type the following command: #set ip eth0 ip 10.16.202.81
Note: In this example, the desired static IP address is 10.16.202.81 and the correct IP should be
substituted as needed.
14
Wait for an OK response.
15
At the prompt, type the following command: #set bridge enable
16
Wait for an OK response.
17
At the prompt, type the following command: #set bridge ipmodule ip-address 10.16.202.81
Note: In this example, the desired static IP address is 10.16.202.81 and the correct IP should be
substituted as needed.
18
Wait for an OK response.
19
At the prompt, type the following command: #set ppp ppp0 enable
20
Wait for an OK response.
21
At the prompt, type the following command: #set ppp ppp0 raw-mode enable
22
Wait for an OK response.