![AeroClave RDS 3110 Operator'S Manual Download Page 4](http://html1.mh-extra.com/html/aeroclave/rds-3110/rds-3110_operators-manual_2862288004.webp)
AeroClave
RDS 3110 Operator Manual
Released July 1, 2020
Page 4
Use or disclosure of data contained on this sheet is subject to the restriction on the cover page of this User’s Manual.
2.0
SAFETY GUIDELINES
READ AND UNDERSTAND THIS OPERATORS MANUAL PRIOR TO USE OF THE SYSTEM.
STRICTLY FOLLOW ALL SAFETY INSTRUCTIONS IN THIS OPERATORS MANUAL
PRIOR TO, DURING, AND AFTER USE OF THE SYSTEM. SYSTEM OPERATORS MUST
COMPLY WITH ALL SAFETY PRECAUTIONS MENTIONED IN THIS SECTION.
Use only AeroClave
-
approved solutions when operating this equipment. Failure to do so, will result
in voiding of warranty and may result in INJURY or DEATH. Follow all label instructions on ap-
proved solutions.
2.1
Operational Safety Guidelines
2.1.1
Only trained and qualified personnel should operate the RDS 3110 unit.
2.1.2
Levels of training:
a)
Demonstration Training: individuals who will be operating the RDS 3110 unit
for
demonstration purposes only, using only de
-
ionized or distilled water as a
surrogate solution, must read and understand this document.
b)
RDS 3110 Operator Training: individuals who will be operating the RDS 3110
unit for facility or asset decontamination using AeroClave solution must be
trained and qualified. See the requirements in Section 2.2 Operator Qualifica-
tions.
2.1.3
Only a authorized AeroClave service technician may repair or maintain this equipment.
2.1.4
The RDS 3110 unit is designed to operate on a standard 120V, 15
-
amp grounded power
receptacle. To avoid electrical hazards or damage to the machine, this minimum power
requirement must be met.
2.1.5
The fine aerosol generated by the RDS 3110 unit may activate smoke detectors. Optical
based smoke sensor systems are typically the most susceptible to false alarms. The facility
or asset being treated must be evaluated on a case
-
by
-
case basis for this. Appropriate
measures must be taken prior to treatment.
2.1.6
Review and follow all labels and warnings marked on AeroClave products.
2.1.7
Before plugging in power cord,
make sure the trigger on the APA, if the APA is
connected, is not pressed down.
2.1.8
It is recommended, for comfort, that operator don a minimum level of PPE consisting of, at
least, an N95 mask prior to APA operation.