There are these options:
Live Output
It displays the basic measured parameters in real time. The parameters are:
Relative altitude, F5J Altitude, Ambient pressure, Temperature of the device,
Throttle input, Input voltage, Free memory
Device Info
Info about the device such as its name, serial number, firmware version and
manufacturer
Logging
Group of Logging settings such as trigger type, sample time and logged
parameters
Competition
Group of Competition parameters such as altitude/time switch, anti zoom,
emergency motor on, competition restart and F5J height measurement
LED
Chooses if the LED displays the F5J or maximum height
COM
Function of the COM port. Note that you might disable the communication with
AerobTec Device Terminal and would need to change the settings back via
computer or activat communication during the initialization.
There are other functions available in AerobTec Device Terminal. Refer to its separate manual for more
information.
8. Warning
It is not recommended to supply your whole aircraft via the Altis Micro device, however it is possible. The
best choice is to use an external BEC circuit or separate power supply.
Do not mount the Altis Micro device on aircraft components which might be hot in operation (ESC,
batteries)!
Do not touch the Altis Micro device to a metal surface, as this might lead to shorting of the power supply
and RC system may fail.
Do not put the Altis Micro in water, fuel or other liquids!
Before flying with the Altis Micro always perform a range check!
Do not disconnect the Altis Micro when the the led indicates “Do not disconnect” state by very fast flashing
AerobTec Altis Micro User Manual
14
Fig. 1: Connection with Altis Micro