5
Very rarely, your AeroBed
®
product may fail to inflate properly.
Should this occur, please use the following check list.
1. If your AeroBed
®
product doesn’t appear to be inflating:
•
Make sure the Quick Release Valve is closed and
locked securely.
If the valve is open, close it by using 2 thumbs to push
cover firmly into valve. Be careful to avoid pushing valve
cover to the right or left as it snaps into valve opening.
•
Make sure your bed is plugged into an active
electrical outlet.
TROUBLESHOOTING
Bed
We recommend that you do not let the plush surface of your AeroBed
®
product get wet.
Repeated exposure to water or other liquids may cause damage to the plush surface
that will not be covered by your warranty. Should liquid come in contact with the plush
surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air
dry completely.
You may clean the PVC on the sides and bottom of your AeroBed
®
product with a mild
dishwashing detergent or household cleaner. Do not use strong chemicals or other
compounds. Allow your bed to air dry completely after cleaning and before storing.
Cover / Valance (if included)
Machine wash separately in warm using mild soap or detergent. Tumble dry on LOW
HEAT. Remove immediately after drying.
CLEANING
1. Inspect your AeroBed
®
product prior to each use.
2. Keep your AeroBed
®
product away from any sharp objects. Large cuts or snags may
not be repairable and will not be covered by your warranty.
3. When not in use, store your AeroBed
®
product in a clean, dry place out of extreme
temperatures. Product must be at room temperature prior to inflating.
4. Do not store your AeroBed
®
product folded inside sofa beds or roll-aways. This may
cause damage to your bed that will not be covered under your warranty.
5. In case of incidental damage to your bed, a repair patch has been included.
Please follow repair instructions carefully.
CARE AND MAINTENANCE
5. Do not store your bed folded inside sofa beds or roll-aways. This
may cause damage to your bed and will void your warranty.
6. If a mattress cover and/or valance is included with your bed, it/
they may be removed after deflation. Alternatively, you may store
your product with the mattress cover and/or valance on the bed.
Wrinkling may occur.