BLUETOOTH TRANSCIEVER
MANUAL
STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - [email protected]
Multiple modules in the same room
If more than one module is used a short distance apart, it is difficult to tell
them apart because they have the same name. Therefore, there is an option to
customize this name. It is possible to change the number in the name. The 1 in
the name “AeroAudio BT 1” can be changed to resp. 1 to 9.
If you press and hold the connect button for 3 seconds when connecting the
power supply, the module enters the programming mode. So first press the
button, then connect the power. The LED will now blink in the rhythm of the
number; so 1 time for the number 1, 2 times for the number 2 etc. By pressing
the button 1 time briefly, the number is increased by 1. The LED blinks equal to
the value of the digit. After 9 times the number will return to 1.
If the correct number is chosen, the button again 3 seconds and then this
setting is stored. This setting will be stored until it is changed again.
