BLUETOOTH TRANSCIEVER
MANUAL
STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - [email protected]
The AeroAudio BT1 is a Bluetooth receiver and transmitter for connecting
Bluetooth devices to a studio. Not only can music be played from a phone, but
also the phone can be used as a telephone fork and thus directly via whatsapp,
skype, telephony or other communication apps a conversation in the broadcast.
The caller hears the return signal from the studio.
Switching on
When the BT1 is switched on, the LED in the connect button will blink fast.
This indicates the BT1 will start. After starting, the led in the connect button
will blink once per 3 seconds. This indicates the BT1 is ready to connect, the
BT1 is now in stand-by mode.
Making a connection
Push the connect button for 1 second to make a new connection. The LED will
blink once per second.
The BT1 is now visible for other Bluetooth devices under the name AeroAudio
BT1. When the bluetooth connection is established, the LED will light up
continuously.
As long as the LED is on continuously, it is possible to play audio files or record
telephone calls.
In case of an incoming phone call, the BT1 will automatically answer the call.
Disconnecting
Press the connect button for 1 second. The BT1 will disconnect the existing
Bluetooth connection. The LED will blink once per second again, ready to
establish a new connection.
Making the module invisible
To make the module invisible to other devices, press the connect button for 1
second after disconnecting it. The LED will now blink once every 3 seconds. The
module is no longer visible and pairing is not possible. This avoids confusion
about which BT module to connect to when using multiple BT modules.
