aero-stream AS1000-2, Installation And Operator'S Manual

Page: 17 / 38

17
© Aero-Stream, LLC 2022
102822 Rev. H
4.After all clusters are unpackaged, systematically raise each Bio-brush vertically from the tank floor
(Figure 21) and feed each of the yellow float ropes through the lid of the tank.
5. For AS450-2, AS500-2 (Figure 11), AS600-2 (Figure 12), AS1000-2 (Figure 14), and AS1500-2
(Figure 15), the center-outlet side Bio-brush cluster should be slid over the center outlet housing as
noted in Figure 20.
The AS750-2 model (Figure 13) incorporates an offset outlet housing configuration using the same
process for positioning the Bio-brush around the outlet baffle.
Figure 20, Bio-Brush Cluster installed around Outlet Baffle
6.Raise the float rings vertically until the Bio-brushes are fully extended. Feed yellow ropes through
access port of tank and temporarily anchor ropes.
Figure 21, Finish Stack of Bio-Brushes
FLOW