aero-stream AS1000-1, Installation & Operator’S Manual

Page: 37 / 56

37
© Copyright Aero-Stream, LLC 2003-2019 102821 Rev. D
3. Installing Diffuser and Air Line
Tank full of water (If the tank is empty, wait for tank to fill before installing
diffusers.)
Slowly lower the air line and diffuser assembly into the tank in the location
shown in Figure 10. When the diffuser hits the bottom of the tank, you will
feel the air line become light. Adequate air line of about 12 to 18 inches
should be left inside the tank so the diffuser assembly rests on the bottom of
the tank in a vertical position (see Figure 41 through Figure 43 below).
Figure 41, Diffuser Quadrant Identification
Figure 42, Diffuser Insertion