aero-naut Sukhoi SU 31M, Building Instructions

Page: 6 / 6

Sukhoi SU 31M
Building instructions - Sukhoi SU 31M 6
20 Tailskid reinforcement 1 Plywood 3 mm Die-cut
21 Tailskid 1 Steel rod 2 mm Ready made
22 Tailskid fairing 1 Plastic Vac. moulded
23 Bottom cowl section 1 Plastic Vac. moulded
24 Top cowl section 1 Plastic Vac. moulded
25 Canopy frame 1 Plastic Vac. moulded
26 Canopy 1 Plastic Vac. moulded
27 Canopy support 1 Plywood Die-cut
28 R.H. wing 1 High-density foam Moulded
29 L.H. wing 1 High-density foam Moulded
30 Wing spar, 5 x 970 mm 1 CFRP tube Ready made
31 Bottom wing fairing 2 Depron Die-cut
32 GRP elevator horn 1 GRP Ready made
33 Rudder horn 1 Plastic 7491/03
34 Aileron horn 2 Plastic 7491/01
35 Aileron pushrod 2 Steel rod 1.5 mm Ready made
36 “Snake” outer sleeve, 500 mm 2 Plastic
37 “Snake” inner, 1 x 500 mm, one Z-bend 2 Steel rod
38 Pushrod connector 2 Metal 7490/07
39 Captive nut, undercarriage 2 Metal 7766/04
40 Undercarriage unit 1 GRP Ready made
41 Nylon undercarriage screw, M4 x 70 2 Nylon Ready made
42 Nylon wing retainer sleeve, M6 4 Nylon 7329/66
43 Nylon wing retainer screw, M6 x 60/80 2 + 2 Nylon
44 Wheel, 70 x 4 mm 2 Plastic Ready made
45 Machine screw, M4 x 35 mm 2 Metal 7776/31
46 Nut, M4 2 Metal 7774/04
47 Self-locking nut, M4 2 Stahl 7766/24
48 Rudder horn screw, M2 2 Metal 7772/40
49 Canopy retainer hook 3 Metal 7800/00
50 Front hook plate 2 Balsa 2.5 mm Die-cut
51 Rear hook plate 1 Balsa 2.5 mm Die-cut
52 Aileron horn reinforcement 2 Balsa 2.5 mm Die-cut
53 Canopy retainer rubber band 2 Rubber Ready made
54 Self-tapping cowl retainer screw 10 Metal 7768/00
55 Hinge 1 Nylon 7495/00
56 Self-adhesive film strip, aileron 2 Plastic, 480 x 50 mm Ready made
57 Self-adhesive film strip, elevator 2 Plastic, 190 x 40 mm Ready made
58 Self-adhesive film strip, rudder 2 Plastic, 105 x 20 mm Ready made
59 Pushrod retainer clip 2 Plastic 7489/07
60 Wing retainer screw reinforcement 4 Balsa 2.5 mm Die-cut
61 Decal sheet 1 Self-adhesive film
62 Building instructions 1