16
Creating a Flight Plan Using
Mission Planner
→https://youtu.be/MhHomssqD7k
8. Select Accept. Confirm the Drone is connected in the top right
corner of the screen. Then select Write WPS.
9. Select the Flight
Data tab.
10. Below the Virtual horizon select
status
tab and move the slider
to the right and find
terpend
and
terload
.
11. Check if Terload and
Terpend are 0 Mission planner
has no stored terrain data for
the area. Connecting to an
internet connection will
download that terrain data into
mission planner. Terload and
Terpend will change when data
is being transferred to the
drone. When finished Terload
will stop at a number and
Terpend will go to zero. Please
wait at least 5 seconds to
confirm that all terrain data is
written then you will be able to
go and fly.
12. If the Field-hawk refuses to go into auto mode when switched to auto
mode it is an indication that it either doesn’t have terrain data, or it is
not close enough to the field. The fieldhawk will need to be close to the
flight path as well as have loaded the terrain data from mission planner.