background image

26

22.11 – 5167557_03

 NRK  0150  (P1-P3)

Water filter:

 Installation in the immediate vicinity of the heat exchanger 

is mandatory,.

Components as standard

Plate heat exchanger

Water temperature sensors (IN/OUT)

Water filter

Pump

Air drain valve

Expansion vessel

Pressure relief valve

Flow switch

Components not provided and responsibility of the installer

Anti-vibration joints

10  Flow shut-off valves
11  Air drain valve
12  Pressure gauge
13  Storage tank
14  Antifreeze electric heater
15  Drain valve
16  Loading unit

3

1

2

2

5

11

8

9

9

10

10

10

4

13

14

11

7

12

12

6

15

10

10

16

 

Do not fill up the hydraulic system by glycol near the suction of the pump. High 
concentration of glycol could stuck the pump. Do not use the pump to mix water 
and glycol.

 WATER  CHARACTERISTICS

System: Chiller with plate heat exchanger

PH

7,5 - 9

Total hardness

4,5 - 8,5 °dH

Temperature

< 65 °C

Oxygen content

< 0,1 ppm

Max. glycol amount

50 %

Phosphates (PO₄)

< 2ppm

Manganese (Mn)

< 0,05 ppm

Iron (Fe)

< 0,3 ppm

Alkalinity (HCO₃)

70 - 300 ppm

Chloride ions (Cl-)

< 50 ppm

Sulphate ions (SO₄)

< 50 ppm

Sulphide ion (S)

None

Ammonium ions (NH₄)

None

Silica (SiO₂)

< 30 ppm

NOTICE under no circumstances does the unit have to be operated 

with water circulating on the heat exchanger whose characteristics 

are different from those indicated in the table WATER CHARACTER-

ISTICS,  under penalty of the warranty expiration. Aermec cannot be 

held responsible for any malfunction of the units which are operated 

with water whose characteristics are outside the limits in the table 

WATER CHARACTERISTICS and for their consequences. 

It is of fundamental importance to keep the oxygen concentration in 

the water under control, especially in open vessel systems. This type 

of system, in fact, is very sensitive to the phenomenon of extra-oxy-

genation of the water (an event that can be encouraged by the incor-

rect positioning of some components). This phenomenon can trigger 

corrosion processes and subsequent drilling of the heat exchanger 

and pipes.

Summary of Contents for NRK 0150









































Reviews: