AERMEC HRS 030, Installation, Use And Maintenance Manual

Page: 9 / 29

Heat Recovery Units Installation, Use and Maintenance Manual
page 9
1.7 Accessories technical data
HRS_W UNIT WITH WATER POST-HEATING SECTION
The use of the coil is requested when post-heating is necessary and must be fixed directly inside the heat recovery unit.
Values referring to the following conditions: Water 70/60 °C; Air inp. T = 8°C; Nominal air flow rate.
HRS_ED ADJUSTMENT DAMPER
The adjustment damper is made up from a galvanised sheet steel frame with adjustable louvered fins.
Model B (mm) A (mm)
HRS090ED 260 210
HRS160ED 290 310
HRS190ED 330 310
HRS230-ED 410 410
BATTERIA POST-RISCALDAMENTO
WATER HEATING COIL - BCR
090 160 190 230 300 390
Resa termica / Heating capacity kW 8.2 12.2 14.4 20.3 24.2 29.9
Geometria / Geometry 25x22 25x22 25x22 25x22 25x22 25x22
Tubi per rango / Pipes per row n° 14 18 18 22 22 22
Ranghi / Rows n° 2 2 2 2 2 2
Passo alette / Fins spacing mm 2.5 2.5 2.5 2.5 2.5 2.5
Temp. uscita aria / Outlet air temperature °C 33.4 30.8 30.2 33.2 31.3 29.7
Perdita di carico lato aria / Air pressure drop Pa 25 32 35 24 36 38
Perdita di carico lato acqua / Water pressure drop kPa 8 14 15 17 22 30
Diametro collettori / Connection diameter Ø gas 3/4 3/4 3/4 3/4 3/4 3/4
Peso / Weight kg 2.5 2.5 2.5 5 5 6.5
HRS_CS SECTION WITH WATER COIL
The HRS_CS module contains a water coil and must be positioned outside the machine in front of the introduction vent.
The condensate drip tray in stainless steel with low condensate drain connection.
Model 090 160 190 230 390
A (mm) 500 600 700 700 700
B (mm) 410 500 500 600 600
C (mm) 450 450 480 660 710
D (mm) 260 290 310 410 410
E (mm) 210 310 330 410 410
Ø1 (gas) 3/4" 3/4" 3/4" 3/4" 1"
Ø2 (mm) 22 22 22 22 22