background image

37

E

nglish

1508 - 5138800_00

ϭͳKEͬK&&

Turning the unit on and off.

ϮͳDK

Press this button to set the various operating modes: automatic (AUTO), 

cooling (COOL), heating (HEAT) and ventilation (FAN).

ϯͳ^>W

Press this button to enable the night comfort function (SLEEP).

ϰͳ<z

LOCK 

Press the 

 and MODE buttons for 3 seconds to activate or disactivate 

the key lock function.

The 

 LED will light up to show the key lock is activated.

ϱͳ>/^W>z

ϲͳ&E

Press this button to select the fan speed: automatic (AUTO), low (LOW), 

medium (MED) and high (HIGH).

ϳͲdDWZdhZΈΣΉ

Temperature control (16 to 30 °C).
Use these buttons to set the temperature you wish to have in the room, 

 to increase the temperature and 

 to decrease it.

ϴͳd/DZ

Timer control buttons (1 to 24 hours).
Use these buttons to set the time in hours, 

 to increase the time and 

 to decrease it.

WƌŽŐƌĂŵŵĞĚƚƵƌŶŝŶŐŽĨĨ͗

 with the fan coil unit on it sets and displays the operation time before the programmed turn off.

WƌŽŐƌĂŵŵĞĚƚƵƌŶŝŶŐŽŶ͗

with the fan coil unit off (but powered) it sets and displays the hours off before the programmed turn on.

ϵͲ^t/E'ͳ,KZ/KEd>>^

Press this button to control the vertical air flow. The first press starts the blades swinging. The second press stops the blades in the 

current position. To re-start the blades swinging press the SWING button again. 





/DWKZdEd
EŽƚĞĨŽƌ&tƐĞƌŝĞƐǁŝƚŚŵŝĐƌŽƉƌŽĐĞƐƐŽƌĐŽŶƚƌŽůůĞƌ͗
Ͳ dŚĞƚǁŽĐŽŶƚƌŽůƚLJƉĞƐ͕ǁŝƌĞĚĐŽŶƚƌŽůƉĂŶĞů;W&tϮͿĂŶĚƌĞŵŽƚĞĐŽŶƚƌŽů;d>tϮͿ͕ĐĂŶďĞƵƐĞĚĂƚƚŚĞƐĂŵĞƚŝŵĞŽŶƚŚĞƐĂŵĞĨĂŶ

coil unit. 

ʹ /ĨƚŚĞĨĂŶĐŽŝůŝƐŽĨĨ͕ĂůůƚŚĞƉƌĞǀŝŽƵƐƐĞƚƚŝŶŐƐŵĂĚĞĂƌĞŬĞƉƚŝŶƚŚĞŵĞŵŽƌLJĞdžĐĞƉƚĨŽƌƚŚĞd/DZƐĞƚƚŝŶŐĂŶĚ^>WŵŽĚĞ͘
ʹ /ĨƚŚĞĨĂŶĐŽŝůŝƐƚƵƌŶĞĚŽŶƵƐŝŶŐƚŚĞ;KEͬK&&ͿŬĞLJ͕ƚŚĞd/DZƐĞƚƚŝŶŐĂŶĚ^>WŵŽĚĞĂƌĞĐĂŶĐĞůůĞĚ͘

W&tϮͳ

WIRED CONTROL PANEL

>/ŶĚŝĐĂƚŝŽŶƐ
KƉĞƌĂƚŝŶŐŵŽĚĞ͗

COOL Cooling
DRY Dehumidification
HEAT Heating
FAN Ventilation

&ĂŶƐƉĞĞĚ͗

Display of the three fan speeds and the automatic control of the 

speed:

AUTO 

Automatic speed control

HIGH High 

speed

MED Medium 

speed

LOW Low 

speed

Functions:

TIMER 

Timer function is activated 

SWING 

Horizontal blades swinging

SLEEP 

Night comfort function activated

LOCK 

Keys are locked

>/^W>z

Temperature 

ΈΣΉ

Displays the value of the temperature set point in °C (from 16°C 

to 30°C)

Timer (hour)

Displays the value of hours (Hr) of the timer, when it is active.
With the fan coil unit on it displays the operation time before 

the programmed turn off.

With the fan coil unit off (but powered) it displays the hours off 

before the programmed turn on

 

/^W>zKEd,t/ZKEdZK>WE>

Summary of Contents for FCW Series
























Reviews: