hazards involved. Children must not play with the
unit! Cleaning and maintenance intended to be
performed by the user should not be performed by
children without supervision.
• Do not dismantle or repair the unit while it is in
operation.
• Do not obstruct the air inlet or outlet. A reduced
air flow limits unit efficiency and leads to
malfunctioning and/or faults.
• Do not spray or throw water directly onto the unit.
Water may cause electric shocks or damage to the
unit.
• Do not drop the remote control and do not press the
keys with pointed objects: this could damage the
remote control.
• Do not pull or deform the supply cable. If the cable
is pulled or used inappropriately, the unit could be
damaged and there is a risk of electric shock.
• Adjust the room temperature correctly to obtain a
comfortable environment.
• Switch off the power supply if the unit is not used for
a long time. When the power supply switch is turned
on, electricity is consumed even if the system is not
operating.
• Do not open doors or windows for a long time when
the unit is working. The cooling yield is reduced if
doors and windows are kept open.
• Position devices such as TV, radio, stereo, etc. at a
distance of at least 1 metre from the unit and the
remote control. There may be some audio and video
interference.
• Do not direct cold air jets towards people, as this
may cause health problems.
PRECAUTIONS FOR USE
• Ensure the equipment is not used by children or
disabled people without suitable supervision;
remember also that the unit must not be used by
children as a toy.
• Do not direct the air jet straight at your body. Avoid
excessive cooling of air; This may cause health
problems.
• Do not direct the air flow straight at animals and
plants.
• Periodically check that the unit installation
conditions have not been altered, and have the unit
checked by a qualified technician.
• Do not insert your hands or any objects in the air
intake and supply points as there is a risk of injury to
yourself or damage to the unit.
• In the event of unit anomalies (such as a burning
smell), switch the unit off and disconnect the power
supply. If the anomaly persists, the unit could be
damaged and could cause electric shocks or fires.
Contact the company.
• Do not spray liquids or insecticides onto the unit, as
this could cause a fire.
• Air the room. You are advised to regularly air the
room where the unit is installed, especially if it is
used by a lot of people or if there are gas devices.
Insufficient ventilation may result in a lack of oxygen.
• If the unit is being used in a room where there are
children, elderly or disabled people or bedridden
patients, ensure that the room temperature is
appropriate.
• Do not use the unit to store foodstuffs.
• When relative humidity is above 80% (with doors
and windows open) and the unit is working in
cooling mode for a long time, condensate water will
probably form in the unit air supply. This could cause
unwanted dripping.
• Do not under any circumstances insert your fingers
or any object into the unit.
• Do not switch the unit on or off from the electrical
panel or the power socket. To switch the unit on
and off, use the remote control or the panel on the
machine.
• Energy saving advice: Do not leave the doors and
windows open while the unit is operating. This
reduces unit efficiency and wastes energy.
• For optimum comfort and energy savings, the
temperature selected in cooling mode must not be
more than 5°C below the outdoor temperature.
• Limit the room’s exposure to direct sunlight by using
blinds or leaving the windows ajar.
• Do not place hot devices, flames or other heat
sources near the unit. This reduces unit efficiency
and wastes energy.
• Be sure to disconnect the power supply when the
unit is not being used for a long period of time.
Disconnect the isolator switch from the power
supply.
• In the event of bad weather, disconnect the power
supply to the unit to avoid any risk of damage.
• Do not use the power cable to pull the unit.
• Do not remove any part of the unit unless you have
been told to do so by an authorised technician.
• Do not move the unit unless the power supply is
absent.
• Do not use the unit if the plug is damaged or the
electricity socket is loose or damaged.
• If the air filter is very dirty, the yield capacity will be
reduced. Clean the air filter regularly.
• When the unit has a fault and not working, please
contact your local After Sales Service and provide
the following information that is available on the
characteristics plate:
1. Name of the unit (model, version, serial number and
date of production).
2. Error code, explaining what happened before and
after the error warning.
DISCLAIMER
AERMEC DOES NOT ASSUME ANY RESPONSIBILITY
FOR DAMAGES TO THE UNIT OR WARRANTY LOSS
IN CASE:
1. The unit is used improperly.
2. Attempts to modify, alter or repair the unit were
made without following the previously mentioned
instructions.
3. The unit that could have suffered from damages
during transport, has not been checked.
4. The unit is operated / repaired without following the
previously mentioned instructions.
5. Spare parts from third-party manufacturers are used.
6. Occurrence of natural disasters, force majeur or
hostile environments.
7. The unit is damaged by corrosive gases in the
atmosphere.
8
