25
Irregularity
Possible reasons
Solutions
When the condensate discharge
pipe is used, there is water in the
condensate discharge tray.
• Check for obstructions in the
condensate discharge pipe.
• Remove the obstruction from
the condensate discharge pipe.
• The discharge pipe is not
installed correctly.
• Remove the drain pipe and
replace it. Make sure that the
pipe is installed correctly.
The power supply LED is not
turned on even though the unit is
connected to the power supply.
• The electric socket is not
inserted correctly.
• No power supply.
• Check whether the supply cable
is damaged.
• Make sure there are no supply
anomalies.
• Check if the power supply plug
is powered.
• Check if the electric board is
damaged.
• Burnt fuse.
• Replace the fuse.
The condensate discharge tray
LED indicator is on.
• The condensate discharge tray is
not positioned correctly or is not
inserted.
• The condensate discharge tray
is full.
• Reposition the condensate
discharge tray.
• Empty the water from the tray
and reposition it.
The unit could function normally
but does not start.
• The humidity level is too high.
• Lower the set-point value with
the - button.
The dehumidifier does not dry
the air as intended.
• Check if there are obstacles
around the unit.
• Make sure that there are no
curtains, shutters or furniture
that block the unit.
• Air filter dirty.
• Clean the filter.
• Doors and windows left open.
• Make sure that all doors,
windows and other openings
towards the outside have been
closed.
• Room temperature too low.
• Low temperatures reduce unit
efficiency. The unit must operate
in an environment with a
temperature above 5 ° C.
Summary of Contents for DML 100
Page 27: ...27 ...
