USER MANUAL
COOLMAX SRX – Wall Mount
Australian Energy Research Labs
AER09 – Rev 1.1
12
th
March 2022
14
AER09 REV 1.1
Powering Up
The CoolMax SRX will power up when a PV voltage above 50Vdc is applied.
When the COOLMAX SRX is first powered the on, the device will run a self-test and then the LED Indication
strip will appear yellow to indicate no charge profile has been configured.
Programming the Device
The CoolMax SRX is programmed via USB-C port located inside the access cover.
The AERL Link Software that can be downloaded at the URL below with instructions for setting the charge
profile located on
Page 18
.
https://link.aerl.com.au
Figure 4:
USB-C Programming Port
Operation
