USER MANUAL
COOLMAX SRX – Wall Mount
Australian Energy Research Labs
AER09 – Rev 1.1
12
th
March 2022
5
AER09 REV 1.1
Note: Warranty conditions remain current until the next revision of this document is published. Proof of purchase is required when
making a warranty claim.
1
Warranty Duration from the Date of Purchase
Warranty Requirements
Total Warranty Duration
1.
You are the original purchaser of the CoolMax SRX.
3 Years
2.
You are the original purchaser and registered your warranty
online within 60 days of installation.
5 Years
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
AERL will bear the cost of parts and labour to repair any manufacturing faults found within the terms and
period of this warranty. For claims under warranty, the faulty product(s) must be returned to AERL’s facility at
2/75 Bluestone Circuit, Seventeen Mile Rocks, Australia, after contacting AERL and receiving the appropriate
RMA documentation from AERL.
No allowance is made for labour or travelling time required to disconnect or reinstall faulty parts. AERL will pay
the cost of freight to return the repaired charge controller to the customer within Australia or New Zealand only.
The method of freight will be determined by AERL.
All installation and user conditions as set down in the instruction manual must be strictly adhered to as failure
to do so may void your warranty. Any faults or like faults caused by lightning, water or moisture ingress, vermin
infestation, improper voltage, faulty installation, use of the product in a manner for which it is not intended,
alterations which affect the reliability or performance of the unit but are not attributable to faulty manufacture,
failure to act on service warning from the AERL charge controller, or damage caused by other system
components will not be covered under warranty.
In the event of the product being out of service, AERL shall bear no responsibility for any consequential loss or
expense. AERL will not be held responsible for any misleading or incorrect information conveyed by anyone
not directly employed by AERL.
Visit
https://core.aerl.com.au/register-product/
and fill out the associated form to activate your full AERL warranty.
Warranty Conditions
