![background image](http://html.mh-extra.com/html/aerco/5r5-384/5r5-384_user-manual_2861558114.webp)
AERCO Control System (ACS)
APPENDIX G:
Programming Using RS232 Communication
Page 114 of 139
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, New York 10913
11/22/2017
GF-131
Phone: 800-526-0288
OMM-0081_0F
control), you can use the Serial Configuration panel (
right
image in Figure 9-1) by selecting
“Serial” in the left navigation pane.
Now, to connect to the remote server, simply click the Open button at the bottom of the dialog
box. A new terminal window will pop up and ask you to log in.
So that you don't have to enter this information every time you wish to connect to your server,
you can save this configuration by typing an appropriate
name
in the Saved Sessions text box in
the PuTTY “Basic Options” window (left image of Figure 9-1) and then clicking the Save button.
In the future, you can select the
name
you chose in the list box and click the Load button to
initialize this particular configuration.
G.2.2 Running a Command on a Remote Machine Using PuTTY
PuTTY may also be used to run some command residing on the remote server. After specifying
the command line you want to run, you will be asked for your account name and password, and
then the command you specified will execute. When it completes, your session will terminate,
and your window will either close or remain open depending on how you configure the session.
Here are the steps:
Running a Command on a Remote Machine Using PuTTY
1. Bring up the PuTTY application and select the server you wish to connect to.
2. At the bottom of the Basic Options dialog box (left image of Figure 9-1) in the section
titled:
Close window on exit
, select the
Never
radio button. This will keep the window
open after the command has finished executing so that you can see any results in the
terminal window.
3. In the menu bar along the left side of the dialog box, click the
SSH
menu near the
bottom. The following screen will be presented:
4. Into the textbox titled,
Remote command
type the full command line you wish to have
executed on the remote machine.
5. You are now ready to execute this command on the remote machine, simply click
the
Open
button at the bottom of the dialog.
6. You will have to provide an account name and password in the terminal window to
complete the process.