AEQ
NETBOX 4 MH
Audio over IP multichannel interface
37
APPENDIX 1. USING "DANTE CONTROLLER" TO CONTROL AUDIO ROUTING.
"Dante Controller" application (developed by Audinate) manages audio over IP
routing between devices, so it is complementary to "NetBox4MH" real time control
application.
The supplied auto run disc contains the executable file to install the software.
Please consult the AEQ AoIP user's manual for more information (it's also included in the auto
run disc).
IMPORTANT NOTE: NETBOX 4 MH does NOT allow redundant operation.
A1.1. Using "Dante Controller" to route audio in NETBOX 4 MH devices.
This is a typical Routing window in “Dante Controller”. In this example, a bidirectional
communication has been established between a NETBOX 4 MH device named “NETBOX4MH-
01” and a CAPITOL IP audio console named “CAPITOL-IP1”.
"NETBOX4MH-01" sends its 4 channels:
NBOX4MH_1L, NBOX4MH_1R, NBOX4MH_2L and NBOX4MH_2R
which, when properly configured, correspond to:
MIC1, MIC2, MIC3 and MIC4
to the "CAPITOL-IP1" console, which respectively receives them in channels
CAPITOL_1L, CAPITOL_1R, CAPITOL_2L and CAPITOL_2R
This allows sending these channels, already at line level, to be mixed by the console.
