AEQ
FORUM
LITE
Ultra-compact digital audio mixer
79
In this case, the "
ANA 1
" signal defines an operative
priority 1
because the "
PROGRAM
"
routing key is activated (it doesn't matter that the "AUDITION" key is also activated and the
channel is not active). "ANA 1", "ANA 2" and "TEL 2" signals will not be sent to "MPX 2" bus
because they are excluded from the group.
This way, "MIC 1", "ANA 5" and "TEL 1" signals will be sent to "MPX 2" because these channels
are active and their "PROGRAM" routing keys are activated. However, "MIC 2", "MIC 4" and
"ANA 4" will not be sent to "MPX 2" because they are active but the "PROGRAM" routing key is
not activated. Finally, "MIC 3", "ANA 3" and "ANA 6" signals will not be sent to "MPX 2" because
these channels are not active.
If we deactivate now the "PROGRAM" key of "
ANA 1
" we change to
priority 2
because the
sending to "
AUDITION
" is still activated. This way, only "MIC 4" signal will be sent now to "MPX
2" because it's the only active channel with the "AUDITION" key activated and the "PROGRAM"
key deactivated ("ANA 2" has also the same situation but this channel is excluded from the
group).
Finally, if we deactivate now the "AUDITION" key of "
ANA 1
" we change to
priority 5.
This way,
only "MIC 2" signal will be sent to "MPX 2" because it's the only active channel with no routing
keys activated.
In next example, in addition to that "MPX 2" group, a second group, "MPX 3", is created
excluding the "MIC 1" input from it:
Supposing the configuration of channels activation and routing of the previous image, the "
MIC
1
" signal defines also in this case an operative
priority 1
for "
MPX 3
" group because the
"
PROGRAM
" routing key is activated (it doesn't matter that the "AUDITION" and "AUX 2" keys
are also activated). This signal will not be sent to "MPX 3" bus because it's excluded from this
group.
This way, "ANA 5" and "TEL 1" signals will be sent to "MPX 3" because both channels are
active and their "PROGRAM" routing keys are activated. However, "MIC 2", "MIC 4", "ANA 2"
and "ANA 4" channels will not be sent to "MPX 3" because they are active but the "PROGRAM"
routing key is not activated, and neither "ANA 1" channel because the "PROGRAM" key is
activated but the channel is not active. Finally, "MIC 3", "ANA 3", "ANA 6" and "TEL 2" signals
will not be sent to "MPX 3" because these channels are not active.