AEQ
FORUM
LITE
Ultra-compact digital audio mixer
31
IMPORTANT NOTE:
Regarding the wiring, the chassis of microphones must be connected to
the chassis of the console frame in order to protect the microphone inputs against uncontrolled
static shocks. Pin 1 (Ground) must be connected to the metal case of XLR connector in the
available terminal for this purpose, so any static shock will be downloaded to ground through
the frame chassis. This rule must be followed in every connector throughout the cable in case of
connections by means of aerial connectors. In the same way, for AES3 or USB digital signals,
the chassis of PCs or other digital audio devices must be also connected to the chassis of the
console frame.
2.2.3.3. Digital outputs.
AEQ FORUM LITE includes 4 stereo balanced digital outputs available through a female DB15
connector identified as "
AES OUT 1-4
" configurable one by one as AES/EBU (by default) or
S/PDIF by configuring the corresponding jumpers.
IMPORTANT NOTE:
In the case of
MCORE
,
there are no associated jumpers: to make this change to SPDIF, a hardware modification must
be made (consult AEQ Technical Service).
Digital Outputs (SUB-D female, 15 pins):
Pin
Signal
Pin
Signal
1
OUT1+
9
OUT1-
2
GND
10
GND
3
OUT2+
11
OUT2-
4
GND
12
GND
5
OUT3+
13
OUT3-
6
GND
14
GND
7
OUT4+
15
OUT4-
8
GND
Digital input 4
Digital input 3
Digital input 2
Digital input 1
Jumpers J42, J47, J48,
Jumpers J25, J26, J30,
Jumpers J41, J43, J44,
Jumpers J23, J24, J27,
J50 and J55
J32 and J37
J46 and J51
J29 and J33
Position 1-2: AES/EBU
Position 2-3: S/PDIF