29/10/2019
Aeotec Wallmote user guide : Aeotec Group
https://aeotec.freshdesk.com/support/solutions/articles/6000176572-wallmote-user-guide-
3/9
Important safety information.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited
may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be
held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
Keep product and batteries away from open flames and extreme heat. Avoid direct sun light or heat exposure. Improper
battery use may damage the product.
WallMote and WallMote Quad are intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet
locations. Do not power permanently. Do not charge for more than 3 hours at a time. Do note apply permanent power.
Quick start.
Installing your WallMote.
1.
Selecting a place or wall in your home to affix your WallMote Back Mount plate.
2.
Using the Double-sided tape, wipe the two surfaces clean of any oil or dust with a damp towel. When the surface has
completely dried, peel one side of the tape back and attach it to the corresponding section on the rear side of the Back
Mounting Plate.
