AENO AAP0003, Installation And Operation Manual, Page: 24 / 39

Installation and Operation Manual
AENO AP3 air purifier
Document version: 1.0.1, aeno.com © ASBISc Enterprises PLC. All rights reserved
Page 24 of 39
2 Installation and operation
To ensure proper operation of the AENO AP3 air purifier, proceed as follows:

Unpack the device (see point 2.1) and plug it in using the power adapter.

Operate the device via the touch panel (see point 1.5).
WARNING! When connecting, operating and storing the AENO air purifier,
follow the rules for safe use of the device (see "Limitations and Warnings"
section).
2.1 Unpacking and preparing for work
Figure 6 – Unpacking and Installation

Carefully open the package and remove the device and accessories.

Open the bottom cover of the device (see Figure 6-a) and make sure that
there is no plastic filter package. If plastic packaging is present, remove the
filter from the device, remove the packaging and place the filter back in the
device. Close the cover of the device.

Install the device in the selected location on a flat, stable, horizontal surface
(see Figure 6-b).