AEMC PowerPad III 8336 User Manual Download Page 4

Page: 4 / 4

Viewing a Transient Detection Session

At the Detection Schedule screen

, press the

button.

For all other displayed screens

, press the

button, and then select

Transient.

Either action displays the Detection List screen.

2. If more than one transient detection recording is stored, use the arrows to select the

desired recording, then press to open it.

In the preceding illustration:

Location in the record of the zone

displayed.

Move cursor to transient triggering time.

Instantaneous value of the signals

according to the position of the cursor on

the scale. Use ◄ and ► to move cursor.

Number assigned to displayed graph (e.g.

1 is highlighted indicating channel V1

triggered capture of the transient)

Move cursor to one period of the signal

before transient triggering time.

Zoom In/Out

Summary of Contents for PowerPad III 8336

Page 1: ...ffer from the corresponding datapoint exactly 1 cycle earlier The preceding cycle defines the mid point of the trigger envelope and is used as reference As soon as a sample is outside the envelope the...

Page 2: ...h of the four fields below it 1 2 3 and N are editable 4V a single field is active for 1 2 3 and N 3V VN one field is active for 1 2 and 3 and another is active for N V1 V2 V3 N each field is active T...

Page 3: ...ession 6 If not enough memory is available an error message appears informing you of this Otherwise the transient detection session will begin at the scheduled start time and date If a session is sche...

Page 4: ...to select the desired recording then press to open it In the preceding illustration 1 Location in the record of the zone displayed 4 Move cursor to transient triggering time 2 Instantaneous value of t...