AEMC PowerPad 8436, Quick Start Manual

Page: 8 / 16

8
Connection Terminals
1. Four (4) current inputs on the top of the
instrument for connecting current sensors
(MN, SR, AmpFlex
®
, MiniFlex
®
, J93 and
MR probes).
2. Five (5) voltage inputs.
Each terminal is protected by a weatherproof plug. The plugs must be removed to
connect the leads, then stored in the pouch inside the front cover. Leave the plugs on
unused terminals to keep the instrument water/air-tight and the terminals clean.
Instrument Configuration
NOTES: The instrument must be configured the first time it is used. The configuration is
saved in memory when the instrument is turned OFF.
The instrument configurations can also be modified through the DataView
®
software.
1.
Press the button to display the Configuration menu:
2. Press the yellow button corresponding to the language to set the display language.
3. The parameter that is ready to be configured will be highlighted in yellow. To
move to a different parameter, use the ▲ and ▼ buttons.
4. Press the Enter button to select a parameter.
5.
Use the ◄ and ► buttons to change a value or setting.
6. When finished, return to the Configuration menu by pressing the button.
N/D L3/C L2/B L1/A
1
2
N/D L3/C L2/B L1/A
E/GN