Precautions for Use
This instrument and its accessories comply with safety standards IEC 61010-1, IEC 61010-031,
and IEC 61010-2-032 for voltages of 600V in category IV or 1000V in category III.
Failure to observe the safety instructions may result in electric shock, fire, explosion, and
destruction of the instrument and of the installations.
• The operator and/or the responsible authority must carefully read and clearly understand
the various precautions to be taken in use. Sound knowledge and a keen awareness of
electrical hazards are essential when using this instrument.
• If you use this instrument other than as specified, the protection it provides may be
compromised, thereby endangering you.
• Do not use the instrument on networks of which the voltage or category exceeds those
mentioned.
• Do not use the instrument if it seems to be damaged, incomplete, or poorly closed.
• Before each use, check the condition of the insulation on the leads, housing, and
accessories. Any item of which the insulation is deteriorated (even partially) must be set
aside for repair or scrapping.
• Use only the leads and accessories supplied. Using leads (or accessories) of a lower
voltage or category reduces the voltage or category of the combined inst leads
(or accessories) to that of the leads (or accessories).
• Use personal protection equipment systematically.
• Keep your hands away from the terminals of the device.
• When handling the leads, test probes, and alligator clips, keep your fingers behind the
physical guard.
• Use only the AC power adapter and battery pack supplied by the manufacturer. They
include specific safety features.
• Some current sensors must not be placed on or removed from bare conductors at
hazardous voltages: refer to the sensor manual and comply with the handling instructions
www.
ShopAEMC
.ca
Shop for AEMC products online at:
1.800.561.8187
