10
Clamp-on Multimeter Model F03
Adjustment is then possible from 1
Ω
to 40
Ω
by pressing the
yellow
button
(short pressure: progression of 1
Ω
by 1
Ω
; press and hold:
progression of 10
Ω
by 10
Ω
).
Once the value is chosen, activate the rotary switch to memo
-
rize.
2.8.2 SELECTING °C OR °F AS THE DEFAULT SETTING
To set either °C or °F as the default,
press the
yellow button
down and turn the rotary switch to the
T°
position.
The instrument beeps twice, then the T° symbol lights up and the
°F symbol flashes if the instrument was previously in °C or the °C
symbol flashes if the was in °F.
The configuation chosen is saved when the key is released.
2.8.3 DEFAULT CONFIGURATION
While pressing down the
yellow button
, turn the rotary switch
from the
OFF
position to
position.
The unit emits a double beep, then all the segments of the digital
display and the
symbol
flashes.
The default configuration is set when the button is released (the
display no longer flashes and the
symbol disappears).
The default configuration is:
• Audio identification threshold: 40
Ω
• Auto-off: ON
• V-Live function: none
• Unit for temperature measurement: not controlled
Summary of Contents for F03
Page 1: ...F03 E N G L I S H User Manual CLAMP ON MULTIMETER...
Page 29: ...NOTES...
Page 30: ......
Page 31: ......
