AC Clamp-on Meter Model CM605
5
2.2 Display Features
Negative polarity
Auto shutdown
Low battery
AC mode
DC mode
Auto range
Zero (Relative)
Peak function
Hold function
Continuity
A V
Current / Voltage
Ω
Resistance
2.3 Button Functions
2.3.1 HOLD/PEAK Button
Data Hold Function:
This function locks the displayed value.
• To activate, press this button during the measurement. The
symbol
appears and the measurement is locked.
• To deactivate, press the button again.
Peak Hold Function:
This function displays the peak value.
•
To activate, press this button during a measurement until the symbol
appears.
• The highest measurement is stored in memory.
• To deactivate the PEAK function, press and hold down the button for
approximately 2 seconds.
2.3.2 ZERO Button
• To activate, press the
ZERO
button to enter the Zero mode.
• The
symbol will appear and Zero the display.
The reading is stored as a reference value for subsequent measure-
ments.
• To exit the Zero mode, press the
ZERO
button again.
