14
Simple Logger
®
II Model CL601
4.6
Clearing Alarm Indication
Clearing alarms can be performed in the
STANDBY
or
RECORD
mode.
1. Press and hold the
PRESS
button. When the
ALARM
(YELLOW) LED
lights up, release the button. The YELLOW LED will blink at a fast rate
for a period of five seconds.
2. Press the
PRESS
button for another 0.5 seconds to complete the
operation.
NOTE:
This does not clear any stored alarms, only indications. Stored alarms
can only be cleared when memory is erased (see
§
4.7).
4.7
Erasing Data from Memory
Erasing data from the instrument’s memory can only be performed while
in the STANDBY mode.
There are two ways to erase the memory:
Erasing the Memory using the PRESS Button:
1. Press and hold the
PRESS
button. When the
ERASE
(RED) LED
lights up, release the button.
This will arm the instrument for an erase operation (when not in record
mode). While armed to erase memory, the RED LED will blink at a fast
rate for a period of five seconds.
2. Press the
PRESS
button for another 0.5 seconds to complete the
erase operation.
NOTE:
If the button is not pressed within five seconds of arming, the erase
operation will automatically disarm and memory will be maintained. For this
reason, if you do not intend to erase memory, simply wait until the RED LED
stops blinking at the fast rate.
Erasing the Memory using the SLII Control Panel:
1. Connect the instrument to the computer, then open the SL
II
Control
Panel
.
2. Select
Erase Memory
from the
Instrument
Menu.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.888.610.7664
