ITEM
BUTTON
DESCRIPTION
9
SENSITIVITy BUTTONS
-
decreases
the vertical sensitivity of the last selected channel down to 5mV.
-
increases
the vertical sensitivity of the last selected channel up to 200V.
NOTE:
For the M channel, the “sensitivity” buttons vary the amplitude factor
but only if a math channel is validated.
10
MENU BUTTONS
- displays the main
“Trigger”
menu
- displays the main
“Tools”
menu
- displays the main
“Acquisition”
menu
- displays the main
“Memory”
menu
- displays the main
“Measurement/Cursor”
menu
- displays the
“Help”
window
Use of the Sensors
Distribution of stray capacitors:
Considering the stray capacitances, it is imperative to correctly connect the reference conductors for
each sensor. The conductors should preferably be connected to the cold points to avoid the transmis-
sion of noise by the stray capacitance between modes.
The noise of the digital ground (earth) is sent to the analog input by the stray capacitance.
NOTE:
In order to prevent electric shocks or possible fires, never use accessories on which the
casing is accessible if it has a voltage of > 30Vrms compared to the ground.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412
