AEMC 2117.67, User Manual

Page: 20 / 52

18
Clamp-on Meter Models 511 and 512
4.7 Diode Measurement
WARNING: Make sure that there is no power
in the tested sample or circuit (dead circuit).
• Turn the rotary range switch to the range.
• Insert red test lead to the red “
+
” input jack and the
black lead to the black “
COM
” input jack.
• Bring the test probe tips into contact with the sample
under test.
• If the polarity of the test leads are reversed with diode
polarity, the digital reading shows ≥ 3.0. This can be
used for distinguishing anode and cathode terminals
of a diode.
0 10 20 30 40
V
®
INSTRUMENTS
MODEL 514
TRMS CLAMP METER
V
1000
400
A
40
OFF
MAX MIN
∆
REL
Hz
HOLD
PEAK
1mS
600V CAT III 1000A
Ω
600V
600V CAT III
1000V CAT II
600V
1000V
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.888.610.7664